3.6m x 1.5m x 20mm Land Roller

​

This Range of Heavy Water Ballast Land Rollers of ours has become a lot more popular in recent years where a farmer needs a good wide land roller but not the weight of our bigger range.

Coverage - 3.6 meters (12ft) per pass

Frame width - 4.1 meters (13ft6”)

Diameter – 1.5M (5ft)

Roller Plate thickness – 16mm(5/8) or 20mm (3/4)  or 25mm (1”)

Weight Full - 10200 Kgs

Weight Empty - 3200Kgs

Axle size - 150mm (6”)

Unique to Pluck’s is our very heavy duty 150mm Axle, because we know that from 48 years of manufacturing Land Rollers that with wider rollers the crown in your road between farms or your lane ways can be the reason that most heavy land roller axles break or at the very least cause your roller to crack around the centre area of the two drums. So we will only manufacture our 3.6 meter (12ft) wide range with 150mm (6”) axles.

This range of rollers have exactly the same axle and bearing setup as our far bigger diameter rollers (1.930 m or 6ft4” models) so this makes them trouble free for life on your farm.

They can be manufactured out of any size plate thickness from 16mm, up to 25mm if you have very stony or rocky ground.  

This model has an optional extra which is a special attachment manufactured  especially for very lumpy ground (for example boarder dyke irrigation humps in the paddock) where the roller is constantly pushing and pulling on your tractor tow bar, what the spring loaded tow bar on the roller frame does is cushion the forward and backwards movements of the roller verse tractor energy and takes all the solid collisions out of the towing connection that you can hear and feel via the tow bar pin every time you speed up or slow down. It makes for a very comfortable day in the cab and no doubt is a lot easier on your tractor drive train and transmission as well.    

All our land rollers come with spring loaded scrapers on the rear and a fold up jack on the front, and a frame design that has stood the test of time to ensure trouble free use for a life time on your farm and the next generation to come.

As with all our rollers they can be transported with the draw bar removed by un-bolting it at our workshop and simply bolting it back on once on your farm. We recommend the use of a HIAB truck or bigger flat deck truck that we can load at our end with our huge forklift, then you simply unload at your end with the HIAB or loading bank and bolt the draw bar back on with the 12 high tensile bolt supplied and your new roller is all set to go for the life time of your farm. By having the draw bar removable this makes freighting cost far less, because your roller can be on the truck deck within the dimensions of the deck, so no oversized permits and extra spending required.

Please contact us for a price, also to ensure we recommend the correct size roller for your farm and tractor and conditions. 

Contact us  0800 758 257 or email  enquires@plucks.co.nz