3.0m x 1.93m x 20mm Water Ballast Land Roller

  • Water Ballast Land Roller 3.0M (10ft) x 1.930M (6ft4”) x 16mm (5/8”) or 20mm (3/4”) or 25mm (1”)

    This is one of the sizes in our standard range of Heavy Water Ballast Land Rollers and is very popular where a farmer needs a good-sized land roller but with quite a bit more weight than the standard smaller diameter rollers or ours.

    Coverage - 3.0 meters (10ft) per pass

    Frame width – 3.550 meters (11ft8”)

    Diameter – 1.930M (6ft4”)

    Roller Plate thickness – 16mm (5/8) or 20mm (3/4) or 25mm (1”)

    Weight Full - 11650 Kgs

    Weight Empty - 5100Kgs

    Axle size - 150mm (6”)


    Unique to Pluck’s is our very heavy-duty 150mm Axle because we know that from 48 years of manufacturing Land Rollers that with wider rollers, the crown in your road between farms or your laneways can be the reason that most heavy land roller axles break or at the very least cause your roller to crack around the centre area of the two drums. So we manufacture all our 1.930M (6ft4”) Diameter rollers with 150mm (6”) axles, so this makes them trouble-free for life on your farm.


    They can be manufactured out of any size plate thickness from 16mm to 25mm if you have very stony or rocky ground.  Our standard size is a 20mm (3/4”) roller plate.

    All our land rollers come with spring-loaded scrapers on the rear and a fold-up jack on the front, and a frame design that has stood the test of time to ensure trouble-free use for a lifetime on your farm and the next generation to come.

  • Optional Extra Spring loaded tow bar attachment

    This model has an optional extra which is a special attachment manufactured  especially for very lumpy ground (for example boarder dyke irrigation humps in the paddock) where the roller is constantly pushing and pulling on your tractor tow bar, what the spring loaded tow bar on the roller frame does is cushion the forward and backwards movements of the roller verse tractor energy and takes all the solid collisions out of the towing connection that you can hear and feel via the tow bar pin every time you speed up or slow down. It makes for a very comfortable day in the cab and no doubt is a lot easier on your tractor drive train and transmission as well.    


    All our land rollers come with spring loaded scrapers on the rear and a fold up jack on the front, and a frame design that has stood the test of time to ensure trouble free use for a life time on your farm and the next generation to come.

  • Shipping

    As with all our rollers they can be transported with the draw bar removed by us un-bolting it at our workshop and you simply bolting it back on once on your farm. We recommend the use of a HIAB truck or bigger flat deck truck that we can load at our end with our huge forklift, then you simply unload at your end with the HIAB or loading bank and bolt the draw bar back on with the 12 big high tensile bolts supplied, and your new roller is all set to go for the life time of your farm.

     By having the draw bar removable this makes freighting cost far less, because your roller can be on the truck deck within the dimensions of the deck, so no oversized permits and extra spending required.

  • Pricing

    Please contact us for a price, also to ensure we recommend the correct size roller for your farm and tractor and conditions.

  • Contact Us

    Contact us on  0800 758 257 or email  enquires@plucks.co.nz